Türkçe
Russian
 
HOMEPAGE      COMPANY      PRODUCTS      QUALITY      ORDER      ZIPPER      CONTACT
 
 

 

Zipper Problems and Solutions

 

Question

:

Paraffin melted whwn the heat of an iron reached the cloth and
staining occured.

 

Solution

:

Elements of zippers are finished with paraffing to facilitate sliding.
When ironing, place papaer or cloth on the parttcoming in contact
with the zipper.

 

Question

:

When an oxidised zipper was used, the zipper stainedthe cloth
while dyeing or washing.

 

Solution

:

Oxidisation is the process which the metal is darkened by
chemical action. Oxidised zippers should not be used on light
colored clothes as these kinds of stains are more noticreable on
light colored clothes. If zipper usage is necessary either brass or
silver should be preferred choice.

 

Question

:

After dyeing process, the zipper color did not match the sample.

 

Solution

:

In some colors, perception difference might occur under different
light sources. As there is difference in light wawes of D65
(daylight lamp) and TL84 (fluorescent lamp), their reflectionon
the cloth also differs.

 

Question

:

A zipper made of or coated with nickel caused an allergic reaction
on direct contactwith the skin.

 

Solution

:

When a silver colored metal zipper is required, choose a new
anti-nickel, dull silver or aluminium zipper.

 

Question

:

The slider caught the fabric when opening or closing the zipper.

 

Solution

:

When sewing a zipper on an aeticle, secure enough width for the
slider to move. Check that the slider works smoothly.

 

Question

:

When sewing with a lock sewing machine, the warpof the zipper
tape was cut and the zipper frayed.

 

Solution

:

As the zipper tape is made of woven fabric, do not cut the warp
to avoid fray.

 

Question

:

Which points must be noted when using zippers in babywear.

 

Solution

:

Special zipper, such as zippers with plastic tops and bottom stops,
are offered for baby wear. Plase ask sales staff.

 

Question

:

The slider caught the fabric, and the fabric tore or the zipper
got stuck.

 

Solution

:

Pull back the slider to the original point as if removing a resisting
object. Do not use excesive force.

 

Question

:

The slider was broken by excessive ironing pressure when
a garment was sent to the cleaners.

 

Solution

:

Please do not iron closeto the slider.

 

Question

:

Elements of zipper melted while ironing because the garment was
pressed without a cloth over the zipper.

 

Solution

:

Whwn pressing, check the heat resistance of the zipper, then place
cloth over the zipper.

 

Question

:

Zippers do not work smoothly after bio-treament.

 

Solution

:

Depending on the chemicals used in the bio-treatment, the zipper
can corrode. Be sure to test the zipper beforehand.

 

Question

:

When chemicalis used in order to prevent cloth's getting wrinkled
after washing, color loss or decay ocurs in zipper.

 

Solution

:

Please prefer resistant materials considering corrosion or be sure
to test the zipper beforehand.

 

Question

:

Kumaşın yıkandıktan sonra kırışmasını önlemek için kimyasal kullanıldığında fermuar rengini kaybediyor veya kullanıldığında çürüyor.

 

Solution

:

Böyle bir muamele yaparken,paslanmaya nispeten dirençli malzemeler kullanınız veya önceden test işlemini gerçekleştiriniz.

 

Note

:

For more information, please send e-mail, satis@ecefermuar.com.tr - info@ecefermuar.com.tr.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Homepage        Company        Products        Quality        Order        Zipper       Contact